You also can use the on/off switch at the back of the Dahua DVR/NVR (if there’s one).
The power cable must be disconnected before starting the procedure (step 1) then connect the cable while holding the reset button. Make sure you have a monitor connected to the DVR.
After you see the startup wizard on the screen, create a new password.Keep the reset push-button pressed for 30 seconds.If you are able to locate the reset button, follow this procedure to reset the Dahua DVR/NVR to factory default: Earlier models don’t have a physical reset button. Dahua started to manufacture a built-in reset button on the motherboard by late 2017. If you can’t find any reset button on your recorder, then your recorder doesn’t have one and you need to try the other methods. In this model, the reset button is located close to the processor. Note that in this DVR/NVR model the reset push button is located at the corner of the motherboard. The reset button should be a black circle and you’ll be able to press it. Open up your recorder to check if there’s any reset button on the board. The success of this method depends on the DVR/NVR model you have, some of them come with a reset button that can be found on the motherboard.
#EYEONET DVR CLIENT PASSWORD#
Reset the password by pressing the reset button
#EYEONET DVR CLIENT HOW TO#
How to know if your DVR or NVR is a Dahua OEM device? If the user interface is exactly the same or very similar then it’s most likely Dahua hardware and you can use this guide to recover your lost password. The reset password methods shown here work for Dahua and their OEMs sold under these brands: Activecam, Advidia, Amcrest, Ameta, Ascendent, Backstreet Surveillance, BV Security, CCTV Security Pros, CCTV Star, CP Plus (Orange Line), Dax Networks, eLine, ENS (formerly Eastern CCTV and SavvyTech), Expose, Lorex, GSS, Honeywell, IC Realtime, Ikegami, Impath Networks, Inaxsys, IndigoVision, Infinity CCTV, Innekt, Intelbras, KBVision, Lumixen, Maxron, Montavue, Oco, Optiview, Rhodium, RVI, Saxco, Security Camera King (Elite), Space Technology, Speco, ToughDog, Tyco Holis, Tyco Illustra Essentials, Unisight, VIP Vision, Watchnet, Winic, Zuum. Dahua password reset for the new generation of DVR or XVRįollow the methods listed and explained below to reset your Dahua branded or OEM recorder.It shows a few other methods to reset the Dahua password. If you are using the new generation of Dahua DVRs or XVRs, you may need to check the article linked below. Below we are going to detail each password reset method.
#EYEONET DVR CLIENT GENERATOR#
The success of these methods depends on the model you have, manufacturing period, firmware version, etc.īasically, to reset a Dahua DVR/NVR and recover the admin password, you need to either do a hard reset on the motherboard or try the default password or use a password generator to create a temporary password based on the DVR’s date (or serial number). If you lost or forgot your admin password and no longer can access your DVR, here you can find different methods to recover your lost/forgotten password. This article will show how to reset the admin password for Dahua DVR or NVR.